Grim Cat Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 194.44x250mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Blue Gray At layer #12 (1.04mm) swap to Lavender Blue At layer #16 (1.36mm) swap to Pink At layer #21 (1.76mm) swap to White for the rest.