Thingiverse
Grip Ball 50mm with rectangular socket
by Nestor9dw
15
Downloads
21
Likes
0
Makes
Este diseño esta basado en la publicación anterior con el orificio redondo.
Puede sostener objetos de hasta 7mm de alto y 18mm de ancho. Para objetos más pequeños se incluyen los diseños de dos adaptadores que se pueden combinar entre si.
La bola se puede abrir para rellenarla con peso si es necesario.
Para su montaje solo son necesarios:
2 Tornillos M3x25mm
2 Tuercas M3
2 Arandelas M3
-------------------------------------------ENG-------------------------------------
This design is based on the previous post with the round hole.
It can hold objects up to 7mm high and 18mm wide. For smaller objects, the designs of two adapters are included that can be combined with each other.
The ball can be opened to fill it with weight if necessary.
For its assembly, you only need:
2 Screws
M3x25mm
2 M3 nuts
2 M3 washers
Puede sostener objetos de hasta 7mm de alto y 18mm de ancho. Para objetos más pequeños se incluyen los diseños de dos adaptadores que se pueden combinar entre si.
La bola se puede abrir para rellenarla con peso si es necesario.
Para su montaje solo son necesarios:
2 Tornillos M3x25mm
2 Tuercas M3
2 Arandelas M3
-------------------------------------------ENG-------------------------------------
This design is based on the previous post with the round hole.
It can hold objects up to 7mm high and 18mm wide. For smaller objects, the designs of two adapters are included that can be combined with each other.
The ball can be opened to fill it with weight if necessary.
For its assembly, you only need:
2 Screws
M3x25mm
2 M3 nuts
2 M3 washers
Nestor9dw also publishes on
77 additional models across 3 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
