Thingiverse
Robotics
Model downloaden
Gripper robot
70
Downloads
76
Likes
2
Makes
This capture is designed for 3D printing on any printer.
You will need to manufacture
1. Print all parts
2. 2x bearing 4х9х4 and 1x bearing 5х9х4 (if not, you can print substitutes, in the archives they are)
3. Servo drive SG90 or equivalent
4. 2x bolts m4 18mm
5. 3x bolts m3 16mm
6. 4x bolts m3 10mm
7. 2x bolts m3 26mm
8. 4x self-tapping screws for servo
You will need to manufacture
1. Print all parts
2. 2x bearing 4х9х4 and 1x bearing 5х9х4 (if not, you can print substitutes, in the archives they are)
3. Servo drive SG90 or equivalent
4. 2x bolts m4 18mm
5. 3x bolts m3 16mm
6. 4x bolts m3 10mm
7. 2x bolts m3 26mm
8. 4x self-tapping screws for servo
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
