GripSpin

⚠️ LICENSE NOTICE: STRICTLY FOR PERSONAL USE ONLY. NO COMMERCIAL SALE, REPRODUCTION, OR DISTRIBUTION ALLOWED. GripSpin Print Settings Use the included .3mf file! The tolerances on this design are highly specific. For the absolute best results, please print directly using the pre-configured sliced settings provided in the 3MF file. Post-Processing Instructions (Crucial for Smooth Movement) Requires a quick break-in process right off the build plate to operate flawlessly: Take the finished print, assemble it and run it directly under tap water. While the water is running over it, repeatedly move the middle piece back and forth. The water acts as a lubricant to help grind away any microscopic z-seam bumps, minor stringing, or internal friction points. Keep actuating it until the movement feels completely loose and buttery smooth. Dry it off thoroughly and enjoy! Once dry it will move more smoothly then when wet.