Thingiverse
Grizzla Flow LED Button enhancer
door muhkuh0815
3
Downloads
5
Likes
0
Makes
button enhancer for the Grizzla flow LED lights. ( https://grizzlapads.com/product/grizzla-flow-lights/ or https://www.amazon.com/Cuvccn-Rechargeable-Bicycle-Waterproof-Taillight/dp/B0B56VFFP2/ )
for the price they are really great, little LED lights. just the buttons are a pain in the a#§.
with this mod it gets a lot easier to press both bottons at once. less time switching the lights on/off - more time for riding. ofc you can still press them seperatly too.
the area where the button can be pressed down is pretty small, so the cover must sit just right. if the button gets stuck, adjust the sleeve very slighty. stretch the tpu print a bit. the 2 pins of the 3d print can also be trimmed down a bit with a little knife.
print in hardTPU/TPU. tried with extrudr hardtpu and saintsmart tpu.
if you want the buttonpress to be harder to execute (e.g. so the lights don't turn on in the backpack) try trimming down the 2 pins which press the buttons.
2 small tree supports for th
for the price they are really great, little LED lights. just the buttons are a pain in the a#§.
with this mod it gets a lot easier to press both bottons at once. less time switching the lights on/off - more time for riding. ofc you can still press them seperatly too.
the area where the button can be pressed down is pretty small, so the cover must sit just right. if the button gets stuck, adjust the sleeve very slighty. stretch the tpu print a bit. the 2 pins of the 3d print can also be trimmed down a bit with a little knife.
print in hardTPU/TPU. tried with extrudr hardtpu and saintsmart tpu.
if you want the buttonpress to be harder to execute (e.g. so the lights don't turn on in the backpack) try trimming down the 2 pins which press the buttons.
2 small tree supports for th
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!