Grogu 200x200

Project: Grogu 200x200.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Base Thickness of 1.04mm The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1 PLA BambuLab Matte Grass Green Transmission Distance: 2 PLA BambuLab Matte Ivory White Transmission Distance: 3.5 This print uses 4 unique filaments Swap Instructions: Start with Charcoal At layer #15 (1.28mm) swap to Mistletoe Green At layer #19 (1.6mm) swap to Grass Green At layer #27 (2.24mm) swap to Ivory White for the rest.