groot nike hueforge

Project: groot nike blanc.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.62x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Dark Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 7 unique filamentsSwap Instructions: Start with Red At layer #6 (0.56mm) swap to Jade White At layer #7 (0.64mm) swap to Blue At layer #8 (0.72mm) swap to Black At layer #11 (0.96mm) swap to Dark Brown At layer #12 (1.04mm) swap to Orange At layer #14 (1.2mm) swap to Yellow At layer #15 (1.28mm) swap to Jade White At layer #18 (1.52mm) swap to Blu