Groove Coaster Controller

# Groove Coaster Controller
GrooveCoaster Controller replica with dimensions from real cabinet
(reposted from [github.com/vikbez/groovecoastercontroller](https://github.com/vikbez/groovecoastercontroller))
Box is 20 x 10 x 56.5 cm

(part linking the ls32 and joy_stick is missing in this picture)

# needed
- a teensy 3.2 or 3.1
- a 3D printer
- a laser cutting machine
- 5mm plywood
- 2 x seimitsu LS32-SE joysticks
- 2 x 60mm buttons
- 2 screws for locking the top of the sticks
- 2 x large 6mm washers
- 2 x anti vibration 6mm nuts
- 8 x computer fan screws
- wood glue

# things to 3d print
- 2 x joy_stick.stl
- 2 x joy_base.stl
- 2 x joy_tube.stl

# things to laser cut
- 2 x box_side.dxf
- 2 x box_insert.dxf (goes on box_middle, helps for rigidity)
- 1 x box_front.dxf
- 1 x box_front.dxf (with a cut for your usb panel mount adapter)
- 1 x box_top.dxf
- 1 x box_middle.dxf
- 1 x box_bottom.dxf

# assembly
### warning: look at the picture ! be careful on