Growling Bear - Hueforge

A portrait of a Growling Bear. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 2.08mm #56b7e6 PLA BambuLab Matte Sky Blue Transmission Distance: 1.3 #11181a PLA BambuLab Matte Charcoal Transmission Distance: 0.1 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #8e9089 PLA #BambuLab Basic Gray Transmission Distance: 0.2 #ffffff PLA #BambuLab Basic Jade White Transmission Distance: 5.4This print uses 5 unique filamentsSwap Instructions: Start with BambuLab Matte Sky Blue At layer #8 (0.8mm) swap to BambuLab Matte Charcoal At layer #10 (0.96mm) swap to BambuLab Basic Blue Gray At layer #15 (1.36mm) swap to #BambuLab Basic Gray At layer #22 (1.92mm) swap to #BambuLab Basic Jade White for the rest.