Thingiverse
GRX chain guard
von S6mont
38
Downloads
48
Likes
0
Makes
A chain guard for Shimano GRX 1x cranks (tested on FC-RX600 1x).
The cain guard is held on using 4 zip ties.
I recommend printing this model in PETG or ABS, PLA will probably be too brittle. I have printed mine with a 0.6mm wide nozzle and 0.25mm layer heights on my I3MK2.5S. The model requires supports (on the build plate only) which are quite easy to remove once printed.
The cain guard is held on using 4 zip ties.
I recommend printing this model in PETG or ABS, PLA will probably be too brittle. I have printed mine with a 0.6mm wide nozzle and 0.25mm layer heights on my I3MK2.5S. The model requires supports (on the build plate only) which are quite easy to remove once printed.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!