GTA V Launch Button

You will need:
* Raspberry Pi Pico
* 1 regular button
* Some wire
* Optionally 1 or 2 red LEDs
* Optionally 1 or 2 blue LEDs
* Optionally 4 75Ω-220Ω resistors

## Raspberry
Connect Raspberry Pi Pico to your computer while holding down the little white Bootsel button on the Pi
A folder should open. Copy the adafruit-circuitpython-raspberry_pi_pico-en_US-8.2.9.uf2 to that folder.
The window should close and reopen with new stuff inside.
The name of the now opened folder is CIRCUITPY
Remove the code.py you see in the CIRCUITPY folder
Copy the code.py (with leds) or code.py (original) to the CIRCUITPY folder
Rename the newly copied file to exactly code.py without anything in the end
Copy boot.py to the CIRCUITPY folder
Open the lib folder in CIRCUITPY folder
Copy the adafruit_hid folder to the lib folder

## Physical connections
If you use code.py (Original):
Solder one of the button contacts to GP18 and a second one on the same side of the button to GND

If you use