guku hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x266.57mm in sizeYou may print at higher layer heights below the Base Thickness of 1.04mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 2.88mm #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #9d2235 PLA BambuLab Basic Maroon Red Transmission Distance: 1.6 #040a09 PLA+ esun black Transmission Distance: 0.1 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 Swap Instructions: Start with Turquoise At layer #21 (1.76mm) swap to Maroon Red At layer #27 (2.24mm) swap to black At layer #30 (2.48mm) swap to Jade White for the rest. can use PLA Basic black bambu filament too