Gulf Logo

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100.34x175mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mm Filaments Used: PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Blue At layer #8 (0.72mm) swap to Jade White At layer #15 (1.28mm) swap to Orange for the rest.