GUN SAFE

This was designed to be a Gun Safe, but it could be used as a Medicine Safe or just a General Purpose locking box. it is 9.8" across and you can not scale it. I can make a smaller version if anyone is interested. I printed this out on my Bambu P1S. Each dial has 8 position so there is a combination of 64 possibilities. The dials have a flat on them to help orient them in the dark and the knobs have detentes. I think it will be self evident how to set the combinations when you see it. I have also thought of a 3 dial combination. Four 4-40 x 3/8" screws and a spring from a ball point pin is needed. The spring goes into the latch at the bottom on the right side and needs to be pressed down with a screwdriver to get it to seat. Two screws hold in the latch and go into the back of the front plate. Two screws are used to hold the dial / disk together and screw into the pegs. I used a piece of filament for the hinge. Use at your own risk!