Gundam

Project: gumdan.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 121.46x172.37mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 5 PLA Generic azul medio Transmission Distance: 2 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Beige Transmission Distance: 8This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Army Blue At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to azul medio At layer #17 (1.44mm) swap to Gray At layer #21 (1.76mm) swap to Beige for the rest.