Gurki from Disney

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 17.5cm x 22.0 in sizeYou may print 200x277.44mmat higher layer heights below the Min Depth of 1.2mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #17 (1.44mm) swap to Blue Gray At layer #22 (1.84mm) swap to Grey At layer #29 (2.4mm) swap to White for the rest.