Guzzlord hueforge

Project: guzzlord.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.27x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.24mmThe Max Depth is 2mm and the Actual Depth is 1.9mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Lilac Purple At layer #8 (0.72mm) swap to Marine Blue At layer #12 (1.04mm) swap to Red At layer #14 (1.2mm) swap to Yellow At layer #20 (1.68mm) swap to Ivory White for the rest.