GYM PIN WEIGHT STACK

Here is a Gym pin for adding weight to a stack when you want to go up in weight in your own increments or when you run out of slots because of GAINZ!.

The model body is 4in (100mm) long. Its slightly less than 2in (50mm) in diameter for fitment of olympic plates.

The only bolt I had was 6in (152mm) long and 3/8in (9.4mm)

my total weight is 220g = body+cap+bolt+magnets

Optional: I had small 5mmx2mm circular magnets on hand but are not required. they dont really work and was too lazy to remove from model.

*only tested on 10,5,2.5 lbs plates*

*use at your own risk* not tested on 45lbs 25lbs plates*