Gyrobauble

I have attached both a 3mf and a stl. With the 3mf you may have to arrange the parts within each other. I did this by enabling the overlapping print settings and then disabling them when the pieces were in place. The outermost piece with the hanger should be offset by 2.5mm for the others to nest inside when placed at 0,0,0

The little box should be printed as support. The hanger is the only piece that requires supports. It is included in the 3mf but needs to be put in place and in the stl I have omitted it for you to find your own preferred solution.

This has been designed with a 1.2mm wall thickness which should work fine with .4 and .6mm nozzles. The gap is .5mm.

I have only printed this in my "prototype pink", but I think it would look awesome in rainbow filament.