H2 Poop Bin

Note: I built the model myself, but this design is an adaptation of “H2 Series Slim Poop/Purge Bin” by user jetpad: https://makerworld.com/en/models/1297031-h2-series-slim-poop-purge-bin. In the original's comments somebody added slits to see how full the bin is. I wanted a version with that. I also rounded the corners to reduce warping and sharp corners are not ideal for 3D printing in general. Last thing I adapated was the handle: Because I had trouble with my CAD software, I replaced the handle with simple holes at the top. You can lift the bucket by those on either side.About the print in the photo: This was my third print and I used an old spool of ABS (non-Bambu). I printed it out of a drying box, but turned it off at about 20% progress. You can see the wet part near the top. Second thing is that Bambu Studio had some weird bug and would not pick up the lower max temp, so it was printed 5°C above that. Used a 0.6mm nozzle. Should probably have used white ASA I had already in