H2D AMS 2 Pro Single raiser/stand

Revision 2: Should now fit to both types AMS 2 Pro. All files are new. Make sure to take Rev 2 files if you download .STEP This model is made with inspiration from other stands, but better fulfills my needs at the moment: Single AMS, access to the top glas and plate storage.The AMS 2 Pro get raised from the top glass, to being able to remove the glas without removing the AMS.The raiser allows to slide the AMS to the back and forward, for top chamber access or filament access, whilst holding the build plates close to the printer. Printing:Like similar designs, it should be printed in heat stable material, like: PETG, ABS(for the advanced) or simlilar.It prints without support, except the little part at the dovetail in the bottom, which breakes of easily after printing.It should be printed like shown in the first picture, for maximum strength and no need for support. Assembly:Simply assemble the parts by pressing the dovetails into place. No need for glue or screws. For safe handeling of