Hakko toroidal transformer mount (80VA 230V conversion)

3D printed mount to hold toroid for hakko fx888d 230V conversion.
Designed to fit this transformer
https://www.tme.eu/en/details/tts80_z230_24v/toroidal-transformers/breve-tufvassons/

Details on conversion can be found here
https://www.eevblog.com/forum/reviews/hakko-fx888d-23by-230v-hack-mod/

You must remove the MOV (Metal Oxide Varistor) from the board, and replace it for something with higher voltage. Since the peak voltage of 230VAC is 320V, and the MOV installed is only rated to 270V

Print in a higher temperature material, in case the transformer gets warm. I printed in ABS, and used acetone to glue parts together.

Don't attempt conversion unless you really know what you are doing!