Half-Life Wall Art

This is an unofficial Half-life wall art, made in homage to the 20th anniversary of Half-life 2. Bring some Gordon Freeman action to your wall! This game has been an important part of my life since my childhood, and I wanted to have something nice related to the game in my house, and now so can you! I have included 2 versions of this model, one in 4 colors, and another in 2 colors. It's also possible to print this without any AMS, using print pauses at certain layer heights. Both models are 120x160mm in size. The frame holder is snap and fit, so no other parts are necessary for assembly. This wall art is part of a series of Half-Life arts I'm making, you can check the others here. Disclaimer: I am not associated with Valve in any way. This is just the work of a fan from the franchise :) Do you like my models? Consider buying me a coffee ;) No-AMS Instructions 4-color version: Add one pause at layer height 0.8 (layer 9) and switch from orange to black. Add another at layer height 1.12 (layer 13) and switch from black to gray. Add one last pause at layer height 1.44 (layer 17) and replace gray with yellow or gold. 2-color version: Add one pause at layer height 0.8 (layer 9) and replace orange with black. Add another pause at layer 1.28 (layer 15) and replace black with orange again. There's also an automated version of those steps in the print profile, select the No-AMS print plates. AMS instructions Just load the desired colors in your AMS, and select the AMS plates in the print profile. If you're slicing the STL directly, you'll need to paint based on the layer heights as described in the No-AMS instructions. Print Settings Printer Brand: Rafts: Doesn't Matter. Supports: No. Resolution: Wall art: 0.08 layer height with an initial layer height of 0.16. Frame holder: 0.2 layer height. Same for the initial layer height. Walls/Perimeters: Wall art: 2. Frame holder: 3. Infill: Wall art: 100% Frame holder: 20% Filament: Any.