Halloween Graveyard

Please rate if you print, this really helps me, thank you Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 100.96x179.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.88mmThe Max Depth is 2.3mm and the Actual Depth is 2.4mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Pro Purple Transmission Distance: 1 PLA Prusament Galaxy Green Transmission Distance: 3.2 PLA BambuLab Basic Yellow Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Purple At layer #17 (1.44mm) swap to Galaxy Green At layer #20 (1.68mm) swap to Purple At layer #22 (1.84mm) swap to Yellow for the rest. Boost MeI hope you like the print if you do please consider a boost. It's for free and it would help me a lot. Thank you and enjoy the print