Halloween hueforge

Project: Halloween hueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 146.67x220mm in sizeYou may print at higher layer heights below the Min Depth of 1.1mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Blue Gray At layer #17 (1.44mm) swap to Jade White At layer #24 (2mm) swap to Orange for the rest.