Halloween hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA PolyLite Black Transmission Distance: 5.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA PolyLite Polymaker Teal Transmission Distance: 6 PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 4 PLA PolyLite Magenta Transmission Distance: 2 PLA PolyLite Orange Transmission Distance: 0 PLA PolyTerra Orange light Transmission Distance: 5 PLA Protopasta White Transmission Distance: 3Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Army Blue At layer #6 (0.56mm) swap to Polymaker Teal At layer #8 (0.72mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #9 (0.8mm) swap to Magenta At layer #13 (1.12mm) swap to Orange At layer #20 (1.68mm) swap to Orange light At layer #30 (2.48mm) swap to White for the rest.Your last slider is set to 2.64mm which is lower than the model height.