Halloween hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA Protopasta Black Transmission Distance: 0.5 PLA PolyTerra Army Blue Transmission Distance: 2.6 PLA PolyLite Temp Purple-Pink-Translucent (Cold) Transmission Distance: 9.2 PLA Protopasta Soda Green Transmission Distance: 5 PLA PolyTerra Savannah Yellow Transmission Distance: 3 PLA PolyLite Polymaker Teal Transmission Distance: 5 PETG JAYO White Transmission Distance: 3.4!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #5 (0.48mm) swap to Blue At layer #7 (0.64mm) swap to Temp Purple-Pink-Translucent (Cold) At layer #8 (0.72mm) swap to Soda Green At layer #14 (1.2mm) swap to Savannah Yellow At layer #15 (1.28mm) swap to Polymaker Teal At layer #21 (1.76mm) swap to White for the rest.