Halloween Pumpkin three

After printing, let the plate cool down and be careful with pulling the print of the plate Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 6.8 PLA BambuLab Basic Yellow Transmission Distance: 5.9This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Brown At layer #14 (1.2mm) swap to Orange At layer #19 (1.6mm) swap to Yellow for the rest.