Halloween Tombstone Base

Description This model contains a set of brackets to attach your foam Halloween Tombstone to your lawn securely. Everything you need is included in this model: Brackets (5 sizes) Screws (3 sizes) Drill/Screwdriver Combo Tool Spikes (3 Sizes) Washers Instructions Measure the base of the Styrofoam Tombstone, and round to the nearest 0.25 inch. Print the plate that corresponds to this thickness. Note that the thicker brackets are also taller, and the screws on the plate are also longer. I recommend using a material that is relatively heat and UV stable. ASA is probably the best, but PETG is good as well. I can’t guarantee the longevity or durability of PLA. Remove the adhesion helpers from the Screws and Tool. Press the back of the Tombstone against the front of the Bracket, and slide the Tombstone down onto the spike on the bracket. There are three different screw positions to choose from. The higher the screw, the more secure the Tombstone will be. However, you might want to position it