Thingiverse
Hammer pendant
door Freezepok
2
Downloads
2
Likes
0
Makes
This is a pendant, inspired by Odin´s hammer Mjölnir. The features are quite small so either a printer with high precision is required, or you just make it out of stainless steel like I did.
For production I used a Spinner CNC with a cutter with inserts and partly manual movement, but you definetly can do that with a conventional mill.
The material used is stainless steel (no idea what type precisely) from 30 mm round stock.
After milling all edges were carefully deburred and sanded, since you don´t want sharp edges hanging around your neck.
Material was sanded to 2000 grid, then polished with ceramic paste and a lot of time.
For production I used a Spinner CNC with a cutter with inserts and partly manual movement, but you definetly can do that with a conventional mill.
The material used is stainless steel (no idea what type precisely) from 30 mm round stock.
After milling all edges were carefully deburred and sanded, since you don´t want sharp edges hanging around your neck.
Material was sanded to 2000 grid, then polished with ceramic paste and a lot of time.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!