Thingiverse
Hamster House
di rickvillela
90
Download
91
Likes
1
Makes
This is loosely inspired by the Hamster House by proshawnsky: https://www.thingiverse.com/thing:1916919
I wanted to create a design that could be printed without supports, and settled on using dovetails to join the parts together.
The original design leaves about 80 x 80mm on the inside with a door opening of 34mm. This seemed a little small, so I suggest scaling 125%, which gives an internal dimension of 100x100mm and a door opening of 43mm.
For reference, the white/copper house is the original size, the white/blue/red house is 125% and the yellow/red house is 150%.
The STLs uploaded don't have the school logos or names so that you can customize your own.
I wanted to create a design that could be printed without supports, and settled on using dovetails to join the parts together.
The original design leaves about 80 x 80mm on the inside with a door opening of 34mm. This seemed a little small, so I suggest scaling 125%, which gives an internal dimension of 100x100mm and a door opening of 43mm.
For reference, the white/copper house is the original size, the white/blue/red house is 125% and the yellow/red house is 150%.
The STLs uploaded don't have the school logos or names so that you can customize your own.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!