Hand held drill press/drill guide

Simple drill guide for [dewalt DCD958 drill](https://www.google.com/search?safe=active&rlz=1C5CHFA_enUS756US756&q=dewalt+DCD958&tbm=isch&source=univ&sa=X&ved=2ahUKEwje3ffwh-nhAhVoITQIHaQ8BWoQsAR6BAgJEAE&biw=2560&bih=1338) or other hand drills with 48.5mm collar. There is clamp test.stl file that you can print to test the fit of the clamp to the drill before you print the actual clamp that takes much longer to print.

The tool consists of two parts - clam that attaches to the drill and guide that slides on two rods. It allows for making square holes and tapping. The it doesn't work that well for setting the position of the hole as the drill chuck and the tool are quite loose and the drill will walk from the initial position.

The tool works well for making square (90 degrees to the surface) holes and tapping existing holes.