Thingiverse
handle and chamfer jig
di SEllimac
14
Download
5
Likes
0
Makes
A jig to make handle or chamfer with a hand router and pattern bit.
The jig is 190x85mm.
Chamfer are all at 45° and range from 5 to 20 by increment of 5 mm.
Handle can be at 25 or 30 mm from the edge and measure 130x30mm
I use double sided tape to hold the jig in place when using it.
Milled in 10mm MDF with 3018 CNC. I already used this many of times.
The jig is 190x85mm.
Chamfer are all at 45° and range from 5 to 20 by increment of 5 mm.
Handle can be at 25 or 30 mm from the edge and measure 130x30mm
I use double sided tape to hold the jig in place when using it.
Milled in 10mm MDF with 3018 CNC. I already used this many of times.
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!