Handles 3D Printer for 3030
von bigsub
48
Downloads
47
Likes
0
Makes
I designed it for a CL-M300 printer, in particular for using with 3030 extrusion.
It is designed for M5x35mm bolt and 3030 M5 t-nut.
It should be printed with strong material as ABS/PET, but for testing I also printed a couples of them in PLA.
I suggest almost 4 or 5 perimeters, top, bottom layers and 20/25% infill.
Should be printed as in the stl, on the side
It is designed for M5x35mm bolt and 3030 M5 t-nut.
It should be printed with strong material as ABS/PET, but for testing I also printed a couples of them in PLA.
I suggest almost 4 or 5 perimeters, top, bottom layers and 20/25% infill.
Should be printed as in the stl, on the side
bigsub veröffentlicht auch auf
48 zusätzliche Modelle auf 2 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
