Thingiverse
Hanger
by andsport
11
Downloads
12
Likes
1
Makes
Hi everybody!
This is the coat hanger I've designed to keep my coats.
I suggest a 0% infill: it is sufficient even with 1 or 2 perimeters.
It obviously depends on the loads. Usual PLA is recommended in stead of PET-G for rigidity issues.
I attached these items on doors and on the tiled walls with a bit of hot-glue (spread it around the perimeter and a bit above the center of the bottom).
This design surprised me: it is very strong, well beyond the appearence ;)
Let me know what you think!
Andrew
This is the coat hanger I've designed to keep my coats.
I suggest a 0% infill: it is sufficient even with 1 or 2 perimeters.
It obviously depends on the loads. Usual PLA is recommended in stead of PET-G for rigidity issues.
I attached these items on doors and on the tiled walls with a bit of hot-glue (spread it around the perimeter and a bit above the center of the bottom).
This design surprised me: it is very strong, well beyond the appearence ;)
Let me know what you think!
Andrew
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
