Harbor Freight Mini-Toolbox clickbase baseplates

I've fumbled around to find a ready-to-print Gridfinity baseplate for my Harbor Freight US General mini-toolbox, but they all fell short in one of the following:Required magnets, which I didn't want to use.Required no magnets but had no way to “hold” the trays in place.Were not sized correctly for the HFT mini-toolbox.With that in mind, I produced this set of Clickbase baseplates, spacers, and connectors. Clickbase is fully compatible with Gridfinity trays and will hold them in place with a satisfying click.The 3mf file contains all the elements you need. The top baseplate is split into two so it can fit a 256x256mm printer. Print each half and stick them together using the connectors. The top plate will use four spacers (also included): One 10mm spacer on the left, and five 9mm spacers on the top left, top right, right, bottom right, and bottom left.The drawers are the same size so all you need to do is to print the first plate twice.It is strongly recommended to print this us