Hard Drive Cover

This cover screws onto the bottom of the 3.5 inch hard drive. If you want your drives to have a custom look or if you need to just protect the PCB from dust if they are mounted upside down.

I have included both screw fixing distances (bigger capacity hard drives normally have different screw spacing). All of suffix 1 have one spacing and all of suffix 2 have the other spacing.

Each spacing type have the plain model, my branded DonLabs model and one with my brand and Barracuda (as I have a Barracuda drive myself). If you would like a different brand from Barracuda (like Western Digital or Hitatchi) just send me a message and I will see what I can do.

One of the pictures the layers look really thin as I was experimenting with showing the infill and I didn't want to wast too much material on a non structural part but I decided it looks better with thicker top and bottom layers.

Make sure you use the little spacers to bring the cover away from the PCB. This will minimise sag d