Thingiverse
Hario Mini Mill Stabilizer
by Cosmicist
6
Downloads
7
Likes
0
Makes
# Hario Mini Mill hand grinder stabilizer
For the shaft stabilizer you'll need:
- 696zz bearing
_That is 6mm inner diameter, 15mm outer diameter, and 5mm thickness._
I designed this remix to be used with the original adjustment nut and made the burr holder a bit tighter to avoid any play while grinding.
I also changed the stabilizer knurling to a style of my liking.
For the outer burr I just padded it with a couple layers of painters tape, it works great and this way there is no need to print an extra part here.
For the shaft stabilizer you'll need:
- 696zz bearing
_That is 6mm inner diameter, 15mm outer diameter, and 5mm thickness._
I designed this remix to be used with the original adjustment nut and made the burr holder a bit tighter to avoid any play while grinding.
I also changed the stabilizer knurling to a style of my liking.
For the outer burr I just padded it with a couple layers of painters tape, it works great and this way there is no need to print an extra part here.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
