Harley Davidson Hueforge - Eagle Logo

Project: Harley Davidson Eagle.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  You may print at higher layer heights below the Base Thickness of 1.28mm  The Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm Filaments Used:  PLA BambuLab Basic Black Transmission Distance: 0.6  PLA BambuLab Basic Jade White Transmission Distance: 5  PLA Bambulab Basic Purple Transmission Distance: 1.6  PLA BambuLab Basic Red Transmission Distance: 4  PLA BambuLab Basic Yellow Transmission Distance: 4.5 This print uses 5 unique filaments Swap Instructions:  Start with Black  At layer #15 (1.28mm) swap to Jade White  At layer #16 (1.36mm) swap to Purple  At layer #17 (1.44mm) swap to Jade White  At layer #24 (2mm) swap to Black  At layer #25 (2.08mm) swap to Jade White  At layer #26 (2.16mm) swap to Red  At layer #28 (2.32mm) swap to Yellow  At layer #29 (2.4mm) swap to Jade White  At layer #30 (2.48mm) swap to Yellow  At layer #32 (2.64mm) swap to Jade White for the rest.