Harley Davidson Hueforge - Eagle Logo

MembershipBoost MeProject: Harley Davidson Eagle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136.74x240mm in sizeYou may print at higher layer heights below the Base Thickness of 1.28mmThe Max allowed Thickness is 3.2mm and the Actual Thickness is 3.2mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA Bambulab Basic Purple Transmission Distance: 1.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 4.5This print uses 5 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Jade White At layer #16 (1.36mm) swap to Purple At layer #17 (1.44mm) swap to Jade White At layer #24 (2mm) swap to Black At layer #25 (2.08mm) swap to Jade White At layer #26 (2.16mm) swap to Red At layer #28 (2.32mm) swap to Yellow At layer #29 (2.4mm) swap to Jade White At layer #30 (2.48mm) swap to Yellow At laye