Slicer Discord
Harry Potter Hueforge – 3D-printbaar model van MakerWorld MakerWorld
Hueforge & Lithophane

Harry Potter Hueforge

58 Downloads
40 Likes
21 Makes
Model downloaden
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x357.04mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Pro Black Transmission Distance: 0.3 PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #27 (1.2mm) swap to Charcoal Black At layer #31 (1.36mm) swap to Steel Grey At layer #40 (1.72mm) swap to White for the rest. If you get the message with the floating regions when slicing... you can ignore this If you want to resize, scale only x and y. Z must stay as it is
Categorie
Hueforge & Lithophane
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Lage betrouwbaarheid
Eendelig
Supports 1/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Software
Cura, PrusaSlicer of vergelijkbaar
Zelfde ontwerper, meer platforms

Snak3Eyes publiceert ook op

11 extra modellen op 1 andere platforms

Geverifieerd door overeenkomende modeltitels op platforms.
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie