Hawk Hueforge

Hawk HueforgeI printed this for my good friend John Turner, this is his image and I have his permission to post this for public use. You can view his images at nightsky2007 | Flickr. PRINTING DIRECTIONS:Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.36x200mm in size. (If you resize this hueforge - do not change the Z scale or the colors will not be correct when printed)You may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.4mm and the Actual Depth is 1.5mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.8 PLA BambuLab Basic Gray Transmission Distance: 2.4 (Grey/Gray/Silver will also work) PLA BambuLab Basic White Transmission Distance: 6This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Gray At layer #10 (0.88mm) swap to White for the rest.