Hawkeye

Tried a watercolor-style 3D print this time — and boom, Hawkeye’s cool and sharp vibe really pops! 🎯🎨💥 If you are interested in my work and want to learn more about me and my creations, follow me here: https://linktr.ee/Terry.creation. I’d greatly appreciate your support on Buy Me a Coffee: https://ko-fi.com/terrycreation. For commercial licenses, visit: https://patreon.com/TerryCreation. Boost MePrinting InstructionsPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 210x210mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Charc