Thingiverse
Hazard 4 HardPoint® compatible mount v2
par IceCreamCoffeeV
0
Téléchargements
1
Likes
0
Makes
Mounting point for Hazard 4 HardPoint® mounts on backpacks and bags.
Fully compatible with original HardPoint® Gear Rails and Beavertail attachements, requires M3 x 10~16 screws and M3 x 4.5 x 5 brass inserts.
Also, you need some kind of hex driver for weekly tightening screws, since PETG will deform under load, and after 2-3 times you can apply soft thread locker to prevent it from unscrewing.
Fully compatible with original HardPoint® Gear Rails and Beavertail attachements, requires M3 x 10~16 screws and M3 x 4.5 x 5 brass inserts.
Also, you need some kind of hex driver for weekly tightening screws, since PETG will deform under load, and after 2-3 times you can apply soft thread locker to prevent it from unscrewing.
IceCreamCoffeeV publie également sur
29 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
