Thingiverse
HC-SR501 PIR ceiling case
por opentux
12
Descargas
11
Likes
0
Makes
Dear makers,
we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR50. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from the sensor's PIR from 360° to about 180° degrees.
Use two 2x4mm screws for fixing.
We tested with PETG due to higher temperature resistance for electronics. Feel free to customize and upgrades!
Installation video:
https://www.youtube.com/watch?v=GK7Lr0WwjkM
Don´t have a 3D printer? You can order part here:
https://opentux.eu/produkt?pn=OPH015EN
we would like to share our ceiling case for PIR Arduino compatible sensor HC-SR50. Diameter of the installation hole is 44 mm. Housing includes lens cover, which can be glued to the housing, enabling to reduce the angle from the sensor's PIR from 360° to about 180° degrees.
Use two 2x4mm screws for fixing.
We tested with PETG due to higher temperature resistance for electronics. Feel free to customize and upgrades!
Installation video:
https://www.youtube.com/watch?v=GK7Lr0WwjkM
Don´t have a 3D printer? You can order part here:
https://opentux.eu/produkt?pn=OPH015EN
opentux también publica en
11 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!