Thingiverse
HD Omega Adapter Case
door RayneX
0
Downloads
0
Likes
0
Makes
This is an MSX Omega HDRV Coupler case for my PCB. This project allows you to connect your MSX Omega to an HDTV using the existing RGB port (after a simple modification, detailed below). You can use HDRV Genesis 2 cables with the Turbo Duo adapter, which will connect to the HD Omega coupler and then use a M-M 8 pin DIN cable to connect to the MSX Omega.
Omega Modification Required:
1) Remove Resistors R14 and R33.
2) Bridge R33 with a wire.
That's it. Note, you Can Not use the RGB port with a SCART after doing this MOD, so be aware of this. End user is responsible to verify that this works with your system. I take no responsibility in any mishaps as I just want to share what I was able to create.
What you Need:
1) HDRV Genesis 2 cable (Can be bought from various places, check with HD Retrovision for online retailers if you need one). I just used one I had.
2) HDRV Turbo Duo cable: https://castlemaniagames.com/products/hd-retrovision-turbo-duo
3) PCB from Oshpark: ht
Omega Modification Required:
1) Remove Resistors R14 and R33.
2) Bridge R33 with a wire.
That's it. Note, you Can Not use the RGB port with a SCART after doing this MOD, so be aware of this. End user is responsible to verify that this works with your system. I take no responsibility in any mishaps as I just want to share what I was able to create.
What you Need:
1) HDRV Genesis 2 cable (Can be bought from various places, check with HD Retrovision for online retailers if you need one). I just used one I had.
2) HDRV Turbo Duo cable: https://castlemaniagames.com/products/hd-retrovision-turbo-duo
3) PCB from Oshpark: ht
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!