Thingiverse

HDD Adapter 3.2

von Dojan

2.9k Downloads

1.9k Likes

65 Makes

Zum Modell

I was looking for an adapter to put my 2.5" SSD drive in a 3.5" HDD bay, and found several nice designs, but none that could be screwed in from underneath, so I made one with all modern holes. It is possible to mount both the drive and the adapter in several different alignments and orientations. Does not obstruct airflow. The version with sunk screw holes can be mounted flat against a surface, with no screw heads from the small drive protruding from the bottom. The minimalist versions have lower sides, to save plastic and print time: However, it is less compliant with the 3.5" standard. Usually no biggie though.

Measurements taken from datasheet.octopart.com/FFD-25-IDEP-2048-N-A-M-Systems-datasheet-4668.pdf

This thing was made with Tinkercad. Edit online at https://tinkercad.com/things/0NNJxmj2D5o for the regular model,
https://tinkercad.com/things/9QvmtPOAdhD for regular minimalist, https://tinkercad.com/things/9pyJxELLzPO for the sunk screw hole model, or https://tinkercad.

3D adapter bracket computer hard drive hdd holder model mount part PLA ssd supportless TinkerCAD useful 3D adapter bracket computer hard drive hdd holder model mount part PLA ssd supportless TinkerCAD useful 3D adapter bracket computer hard drive hdd holder model mount part PLA ssd supportless TinkerCAD useful

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

keine Supports

Ohne Supports Einteilig Hardware nötig

Supports 0/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 1/3

Drucker