Thingiverse
HDZero Nano Camera Protective Mount for Switchback Pro and LightSwitch
di rquellet
10
Download
17
Likes
0
Makes
Protective fixed-angle mounts for Five33 Switchback Pro and LightSwitch.
30, 35, 40, 45, 50, and 55deg angle mounts are available.
Design features a protective cone for the lens with notched out corners so that the camera feed doesn't show any of the protective cone in view.
After printing, remove thin whips of excess TPU with a hot air gun or lighter.
Design is parametric and customizable by editing the configuration properties in Onshape CAD file: https://cad.onshape.com/documents/edd456efce1d230b5d3d020d/w/6dec05d952a706a4a2cb2aee/e/bed1528252c7bbd23ac324a0?configuration=List_dKRuWe3BZBmdrs%3DNanoV2_45deg&renderMode=0&uiState=62f00273b998fd7a75f0f49f
30, 35, 40, 45, 50, and 55deg angle mounts are available.
Design features a protective cone for the lens with notched out corners so that the camera feed doesn't show any of the protective cone in view.
After printing, remove thin whips of excess TPU with a hot air gun or lighter.
Design is parametric and customizable by editing the configuration properties in Onshape CAD file: https://cad.onshape.com/documents/edd456efce1d230b5d3d020d/w/6dec05d952a706a4a2cb2aee/e/bed1528252c7bbd23ac324a0?configuration=List_dKRuWe3BZBmdrs%3DNanoV2_45deg&renderMode=0&uiState=62f00273b998fd7a75f0f49f
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
