Headphone Hanger

Here is a headphone/headset hanger I have made. I designed it to be compact, easy to print, and strong. The screw holes are chamfered for tapered head screws so they sit flush. I also added holes in the bottom for easy mounting as pictured with a screwdriver.

I printed at about 40-60% infill. if there is a chance it can get bumped by your knee under your desk I would recommend printing at around 60% infill for more rigidity.

NOTE: I would recommend drilling pilot holes then using a screwdriver to drive the screws into your desk. Do not over-tighten the screws when mounting, the plastic may crack otherwise.