Slicer Discord
Headphone stand – 3D-printbaar model van MakerWorld MakerWorld
Gadgets

Headphone stand

7 Downloads
1 Likes
0 Makes
Model downloaden
We designed this stylish headphone stand with the following goals in mind:It can be used for headphones of different sizesMinimum material use: it consumes less than 100 grams of filamentCan be printed on the Prusa Mini+: the largest part is exactly 180 mm longAvoid using non-printed parts or fasteners.Has a sleek, industrial lookPrintingPrinted on a Prusa Mini+, using the standard 0.4 mm nozzle, and 0.2 mm layer height. We used matte black PLA filament.Print the parts in the provided orientation (Stand and Base are laying on a side). No supports are required.You can add a Brim to improve the bed adhesion. If you are using a Prusa Mini+ (like we did) the brim type has to be set to “Inner Brim Only” for the Stand part to fit.AssemblyThe Stand is placed on top of the Base, using the matching features to position them correctly. See the pictures below. Then, you'll have to slide the Insert part on the slot, making sure the parts are aligned.In case it takes to much force to slide it f
Categorie
Gadgets
Bron
MakerWorld
Gepubliceerd
Bijgewerkt
Wat je nodig hebt om te printen: Beginner Gemiddelde betrouwbaarheid
Waarom?
geen supports · 0.20mm lagen
Zonder supports Eendelig
Supports 0/3
Montage 0/3
Instellingen 1/3
Bedgrootte 0/3
Nabewerking 0/3
Printer
FDM / FFF
Bestandsformaat
STL
Materiaal
PLA
Laaghoogte
0.2 mm
Software
Cura, PrusaSlicer of vergelijkbaar
Nog geen beoordelingen
Nog geen reacties – wees de eerste!

Vergelijkbare modellen

6 Suggesties
Feed Blog Slicer Kostenrekenmachine Zoeken op afbeelding Indienen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Toevoegen aan collectie